Quick Reference Guide

64 SYSCFG
--noraidprompt*
The asterisk is not part of
the command syntax.
NA This option specifies that the
BIOS must not prompt for
confirmation when changing the
mode of a RAID controller. This
option can only be used with the
--embscsiraid or
--embscsiraidchb options.
Without this option, the user is
prompted during POST to
confirm the change of a RAID
controller from RAID(SCSI) to
SCSI(RAID). This option is not
replicated.
CAUTION: When changing
a RAID controller from SCSI to
RAID or from RAID to SCSI, data is
lost on the affected hard drives.
The warning message for this data
is not displayed if you use the --
noraidprompt option. To avoid data
loss, back up any information on
the hard drives before changing
the type of controller used with
the drives.
All PowerEdge
systems
Example:
A:>syscfg --
embscsiraid=raid
--noraidprompt
embscsiraid=raid
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration
(continued)
Option Valid
Arguments
Description Applicable
Systems