Quick Reference Guide

54 SYSCFG
--floppy auto, off,
readonly
This option sets the diskette drive
controller to auto, off, or read-
only. This option is available on all
supported systems that have a
supported diskette drive.
This option can be replicated.
Example:
A:>syscfg --floppy=auto
floppy=auto
All PowerEdge
systems
--formfactor N/A This option displays the geometry
of modular PowerEdge systems.
This is a read-only option and can
have the following values: half-
height (the modular system
occupies 1 slot of the chassis),
half-height dual-width (the
modular system occupies 2
horizontal slots of the chassis),
full-height (the modular system
occupies 2 vertical slots of the
chassis), and full-height
dual-width (the modular system
occupies 4 slots of the chassis).
Example:
A:>syscfg --formfactor=
fullheight,dualwidth
formfactor=
fullheight,dualwidth
PowerEdge
modular systems
--fsbr 115200, 57600,
19200, 9600
This option sets the console
redirection fail safe baud rate in
bps.
Example:
A:>syscfg --fsbr=9600
fsbr=9600
All PowerEdge
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration
(continued)
Option Valid
Arguments
Description Applicable
Systems