Quick Reference Guide

48 SYSCFG
--embsataraid off, combined,
ata, ahci, raid,
qdma
This option configures an
embedded SATA RAID controller.
This option can be replicated.
• off — disables the embedded
SATA RAID controller.
•
combined — sets the SATA
RAID controller to combined
mode.
•
ata — sets SATA RAID
controller to ATA mode.
•
ahci — sets ATA RAID
controller to ahci mode.
•
raid — sets SATA RAID
controller to RAID mode.
•
qdma — sets the SATA RAID
controller to support ATAPI
devices at transfer rates much
higher than PIO. A device driver
must be installed on your
system to use the QDMA mode.
Example:
A:>syscfg --
embsataraid=off
embsataraid=off
All PowerEdge
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration
(continued)
Option Valid
Arguments
Description Applicable
Systems