Quick Reference Guide

SYSCFG 125
--solbitrate 9600, 19200,
57600, 115200
Sets the serial channel
communication bit rate
(in bps) with the BMC
when SOL is activated.
This option can be
replicated.
NOTE: The arguments
for --solbitrate vary with
various Dell systems. If
an argument valid for a
particular Dell system is
entered for another
system, the
‘Parameter out of
range’ error is
displayed.
Valid arguments are:
19200 - for PowerEdge
x8xx systems
57600 - for PowerEdge
x9xx systems that do
not have DRAC 5
installed
115200 - for Dell x9xx
systems that have
DRAC 5 installed.
Table 3-6. BMC and Remote Access Controller Configuration Options
(continued)
Option Sub-option Valid
Arguments
Description Applicable
Systems