User's Manual

90 Preparing the Directory Structure for Deployment in Embedded Linux
Table 7-3. System Utilities and Supporting Files
Toolkit Components Purpose
config.ini Configuration file used by raidcfg.
pci.ids Used with syscfg to report PCI devices.
racadm Wrapper script which invokes racadm4, racadm5, or
racadm6 depending on the remote access controller (RAC)
on your system.
racadm4 Configures DRAC 4/P and DRAC 4/I RACs.
racadm5 Configures DRAC 5 RACs.
racadm6 Configures iDRAC6
NOTE: This feature may not be supported on all systems.
racadmErrorCodes.txt Lists the error codes and messages for the racadm tool.
racser Chat script to bring up a Point-to-Point Protocol (PPP)
connection required to transport racadm3.
racsvc4.sh Start-up script for DRAC 4/P and DRAC 4/I RACs.
raidcfg Creates and reports RAID information.
RaidcfgErrorCodes.txt Lists the error codes and messages for the raidcfg tool.
stsvc.ini Configuration file used by raidcfg.
syscfg
•Reports and configures:
– basic input/output system (BIOS) settings and options
– baseboard management controller (BMC) settings and
options
–DRAC
• Maintains system state between reboots
• Reports hardware devices and other system-related
information
SyscfgErrorCodes.txt Lists the error codes and messages for the syscfg tool.
sys.ini A .ini file used with syscfg.
UpinitErrorCodes.txt Lists the error codes and messages for upinit.sh.