User's Manual

46 Preparing the Directory Structure for Deployment in Microsoft Windows PE

Boot the target system with DTK Windows PE image.

After WinPE starts, make sure that the server is able to ping the

management station.

Run the following command to connect the target system to the shared

folder

os_deploy

X:\Dell\Toolkit\Tools>net use z: \\<IP address of

the management station >\os_deploy

On the target system, set the following environment variables:

DT_OSSRC=z:\W2K3SRC\I386

DT_UNATTEND=z:\dell\x32\toolkit\systems\PER515

\unattend.txt

Table 3-7. Mandatory Fields in unattend.txt

Field Example

OEMBootFiles

For a R515 system that has H700 controller, you must retain

the following entries and remove the rest of the entries under

the field

OEMBootFiles.

percsas2.sys

oemsetup.inf

percsas2.cat

txtsetup.oem

NOTE: These are the files in

os_deploy\Dell\x32\toolkit\systems\PER515\$OEM$.NET\textmo

de folder.

MassStorageDri

vers

For a R515 system that has H700 controller, you must retain

the following entry and remove the rest of the entries under

the field

MassStorageDrivers.

"DELL PERC H700/H800 RAID Controller

Driver (Server 2003 32 bit)"="OEM"

NOTE: This driver description string must match the string

defined in the right-hand side of the SCSI section of the

Textsetup.oem file.