User's Manual

36 Preparing the Directory Structure for Deployment in Microsoft Windows PE
Sample Configuration Files
Table 3-2 describes examples of configuration files used to perform a scripted
deployment. The files for 32-bit and 64-bit supported systems are located in
the following directories:
• Z:\Dell\x32\Toolkit\template\Configs
• Z:\Dell\x64\Toolkit\template\Configs
NOTE: All configuration files are provided as examples only. These sample
configuration files must be edited before they can be used in any deployment tasks.
SyscfgErrorCodes.txt Lists the error codes and messages for the SYSCFG.EXE
tool.
sysdrmk.exe Used by UPINIT.BAT to patch the boot sector and Master
Boot Record (MBR).
UpinitErrorCodes.txt Lists the error codes and messages for UPINIT.BAT.
version.txt Contains the DTK version in use.
Table 3-2. Sample Configuration Files
Toolkit
Components
Purpose Location
RACCFG.INI Sample configuration file
for DRAC 4 remote access
controllers.
Move to the directory
\Toolkit\Systems\<system>.
RAIDCFG.INI Sample output file to
enable RAID replication.
Move to the directory
\Toolkit\Systems\<system>.
SYSCFG.INI Sample configuration file
for SYSCFG utility to
configure the BIOS and
BMC settings.
Move to the directory
\Toolkit\Systems\<system>.
Table 3-1. System Utilities and Supporting Files
(continued)
Toolkit Components Purpose