User's Manual

34 Preparing the Directory Structure for Deployment in Microsoft Windows PE
DTK utilities for 32-bit systems are located in the following directories:
• Utilities: Z:\Dell\x32\Toolkit\Tools
•Sample scripts: Z:\Dell\x32\Toolkit\template\scripts
• Sample configuration files: Z:\Dell\x32\Toolkit\template\Configs
DTK utilities for 64-bit systems are located in the following directories:
• Utilities: Z:\Dell\x64\Toolkit\Tools
•Sample scripts: Z:\Dell\x64\Toolkit\template\scripts
• Sample configuration files: Z:\Dell\x64\Toolkit\template\Configs
The directory Z:\Dell\x32\Toolkit\Systems or Z:\Dell\x64\Toolkit\Systems is
a placeholder that can be used for all system information that is captured
using sample scripts and tools (for example, the system specific basic
input/output system (BIOS) and baseboard management controller (BMC)
configuration files used by the DTK utilities for configuring a system).
See ""Setting Up a Directory Structure for Deployment" on page 41" for
further discussion of the deployment directory structure.
DTK Contents
DTK contains Windows PE-based utilities, sample scripts, sample configuration
files, drivers, and documentation for automating the deployment of Dell systems.
The following sections provide a complete list of DTK contents and a short
description of each component. For a more complete explanation of DTK
utilities, see the Dell OpenManage Deployment Toolkit Command Line Interface
Reference Guide. For an explanation of the sample configuration files and scripts,
see ""Editing the Sample Batch Files to Perform a Complete System Deployment
in Windows PE" on page 53."
System Utilities and Supporting Files
Table 3-1 describes the files, located in Toolkit\Tools. These are the core tools
(utilities) that perform pre-operating system configuration and deployment
tasks. See the Dell OpenManage Deployment Toolkit Command Line Interface
Reference Guide for complete information about the capabilities of each DTK
utility.