User's Manual

32 Preparing the Directory Structure for Deployment in Microsoft Windows PE
Perform the following steps to extract DTK components to a workstation
running Windows:
1
Download the DTK file DTK3.X-WINPE-XX.exe from the Dell Support
website at
support.dell.com and save it anywhere on your system.
2 After the file downloads, double-click the file.
3 Click OK .
4 Click Unzip .
By default, files are unzipped to
C:\ . You can unzip the DTK components
to your local hard drive and then copy them later to a network volume,
or you can change the installation path to an available network share.
For example, you can unzip the files directly to the network share
(for example,
Z:\ ) that you plan to use in the deployment process.
NOTE: Do not copy the DTK components to a Novell NetWare network
volume. DTK network-based deployment is not supported from mapped Novell
NetWare systems. DTK utilities do not run in Windows PE when Novell’s
Client32 is loaded.