Quick Reference Guide

SYSCFG 61
FILE LOCATION: C:\Work\DTK\DTK_CLI_3.4\Source\DTKCLc03.fm
DELL CONFIDENTIAL – PRELIMINARY 12/3/10 - FOR PROOF ONLY
--noraidprompt*
The asterisk is not part of
the command syntax.
NA This option specifies that the
BIOS must not prompt for
confirmation when changing the
mode of a RAID controller. This
option can only be used with the
--embscsiraid or
--embscsiraidchb options.
Without this option, the user is
prompted during POST to
confirm the change of a RAID
controller from RAID(SCSI) to
SCSI(RAID). This option is not
replicated.
CAUTION: When changing
a RAID controller from SCSI
to RAID or from RAID to
SCSI, data is lost on the
affected hard drives. The
warning message for this
data is not displayed if you
use the --noraidprompt
option. To avoid data loss,
back up any information on
the hard drives before
changing the type of
controller used with
the drives.
All Dell
PowerEdge
systems
Example:
A:>syscfg --
embscsiraid=raid
--noraidprompt
embscsiraid=raid
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration
(continued)
Option Valid
Arguments
Description Applicable
Systems