Quick Reference Guide

SYSCFG 35
FILE LOCATION: C:\Work\DTK\DTK_CLI_3.4\Source\DTKCLc03.fm
DELL CONFIDENTIAL – PRELIMINARY 12/3/10 - FOR PROOF ONLY
--conred serial1, serial2,
off, bmcsol,
mmb
This option configures or reports
the communication port for
console redirection. If this option
is set to a serial port, then the
serial port option is not available.
See the descriptions for "--serial1"
on page 71 and "--serial2" on
page 72. If only one serial port is
present on a system, the serial2
argument is not available. This
option can be replicated.
Example:
A:>syscfg --conred=
serial1
conred=serial1
Dell PowerEdge
systems earlier
than PowerEdge
x9xx systems
--conterm vt100, ansi This option configures or reports
the terminal type for console
redirection. This option is
available on all supported systems
that support console redirection.
This option can be replicated.
Example:
A:>syscfg --conterm=
vt100
conterm=vt100
All Dell
PowerEdge
systems
--cpuc1e enable, disable This option enables or disables
C1-E. By default, it is enabled.
This option can be replicated.
Example:
A:>syscfg --cpuc1e=
enable
cpuc1e=enable
Dell PowerEdge
xx1x systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration
(continued)
Option Valid
Arguments
Description Applicable
Systems