Quick Reference Guide

226 Messages and Codes
FILE LOCATION: C:\Work\DTK\DTK_CLI_3.4\Source\DTKCLaB.fm
DELL CONFIDENTIAL – PRELIMINARY 12/3/10 - FOR PROOF ONLY
184 The operation cannot be performed at this
time. The firmware can recondition a battery
that has a Degraded or Power Low state. The
firmware will not recondition a battery that
is functioning normally or that has a Ready,
Failed or Missing state.
185 The version of the controller firmware
installed on your system does not support
this operation.
186 There are no disks of the correct type
available to be assigned as a hot spare.
187 There are no disks of sufficient size
available to be assigned as a hot spare.
188 There are no disks of the correct type and
sufficient size available to be assigned as
a hot spare.
189 The Create Virtual Disk task was successful
but the operating system may not be aware of
the new virtual disk.
191 The import of foreign configurations is
complete. Some configurations could not be
imported.
192 Enable alarm command failed. The enclosure
processor is busy or a firmware download is
in progress.
193 Disable alarm command failed. The enclosure
processor is busy or a firmware download is
in progress.
194 Quiet alarm command failed. The enclosure
processor is busy or a firmware download is
in progress.
Table A-5. RAIDCFG Error Codes and Messages (continued)
Error Code Message