Quick Reference Guide

Messages and Codes 215
FILE LOCATION: C:\Work\DTK\DTK_CLI_3.4\Source\DTKCLaB.fm
DELL CONFIDENTIAL – PRELIMINARY 12/3/10 - FOR PROOF ONLY
UPINIT Linux-Specific Error Codes and Messages
Table A-3 lists error codes and messages specific to the Linux environment.
UPINIT Windows PE-Specific Error Codes and
Messages
Table A-4 lists error codes and messages specific to the Windows PE
environment.
RAIDCFG Error Codes and Messages
The RAIDCFG utility checks your commands for correct syntax when you
enter them. When you enter a command, a message displays stating the
results of the command.
Failure Messages
The RAIDCFG utility failure messages provide error codes to help diagnose
why some commands do not succeed. See Table A-5 for a list of the error
codes and the associated messages.
Table A-5 lists RAIDCFG error codes and messages.
Table A-3. UPINIT Linux-Specific Error Codes and Messages
Error Code Message
31 Error: Invalid disk specified.
32 Error: Mount failed.
33 Cannot create mount point <mount point>. File
exists.
34 Error: fdisk failed.
Table A-4. UPINIT Windows PE-Specific Error Codes and Messages
Error Code Message
31 Error: DISKPART failed.
32 Error: DISKPART command file not found.