Quick Reference Guide

168 RAIDCFG
FILE LOCATION: C:\Work\DTK\DTK_CLI_3.4\Source\DTKCLc04.fm
DELL CONFIDENTIAL – PRELIMINARY 12/3/10 - FOR PROOF ONLY
Enumerating Array Disks
Table 4-5 lists the RAIDCFG options, parameters, and pre-defined
arguments for enumerating array disks (hard drives).
• nwc — (No-Write-Caching)
specifies that the controller does not
send a write-request completion
signal after the data is written to the
disk.
NOTE: The wc and nwc options are
supported on the CERC SATA 1.5/CH
controller only.
The -wp option is optional and can be
added to the command line in any order
after the mandatory option
combination.
For SCSI controllers, the value of LUN
should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in which
case you must specify values for
channel, target, and enclosure.
Table 4-4. Creating Virtual Disks
(continued)
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameter
Arguments
Description