Quick Reference Guide

164 RAIDCFG
FILE LOCATION: C:\Work\DTK\DTK_CLI_3.4\Source\DTKCLc04.fm
DELL CONFIDENTIAL – PRELIMINARY 12/3/10 - FOR PROOF ONLY
-ctrl -ac=cvd
-c=id -ad=
ch:targ,ch:targ
, ...
[or
ch:targ:encl,...]
or
controller
action=
createvdisk
controllerid=
id adisk=
channel:target
:lun,
channel:target
:lun,...
[or
channel:target
:
enclosure,...]
-str
or
strict
<number> Strict (-str parameter) is the
percentage of expected array disk
utilization.
Example:
A:> raidcfg -ctrl -ac=
cvd -c=0 -ad=0:0,0:1 -r=
1 -str=20
If the unused portion of an array disk is
greater than the above percent, raidcfg
aborts.
For SCSI controllers, the value of LUN
should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in which
case you must specify values for
channel, target, and enclosure.
Table 4-4. Creating Virtual Disks
(continued)
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameter
Arguments
Description