Quick Reference Guide

132 SYSCFG
FILE LOCATION: C:\Work\DTK\DTK_CLI_3.4\Source\DTKCLc03.fm
DELL CONFIDENTIAL – PRELIMINARY 12/3/10 - FOR PROOF ONLY
--envfile <filename> This option reads the environment variable file
(included in DTK as sys.ini) and sets environment
variables to names in the file, based on the system's
information. Primarily, this command performs a PCI
scan and matches the vendor/device numbers of the
devices to those specified in the environment variable
file. For more information, see the "Environment
Variable File" section.
Example:
A:>syscfg --envfile sys.ini
DELLNIC1=INTEL PRO100
DELLNIC2=INTEL PRO100
DVIDEO1=RAGEXL
DIDE1=PEQUR/ROSS IDE
DSCSI1=AIC-7899
--mem*
The asterisk is
not part of the
command
syntax.
None This option reports the amount of system memory
physically installed in the system, not the amount of
memory available to an operating system. If used with
the -s option, the environment variable is set to the
amount of system memory. The last two characters of
the memory value indicate the order of magnitude used
(KB or MB).
Example:
A:>syscfg --mem
mem=256MB
Table 3-8. SYSCFG Options and Arguments for System Configuration
(continued)
Option Valid
Arguments
Description