Quick Reference Guide

SYSCFG 129
FILE LOCATION: C:\Work\DTK\DTK_CLI_3.4\Source\DTKCLc03.fm
DELL CONFIDENTIAL – PRELIMINARY 12/3/10 - FOR PROOF ONLY
Table 3-7. SYSCFG Options and Arguments for State Configuration
Option Valid
Arguments
Description
-b
or
--byte
<string> This option specifies a value to write to state data.
The format of the argument must be in decimal format
unless the
-x option is given. If the -x option is given,
the value is interpreted as hexadecimal format. The value
can optionally contain 0x. The decimal range is 0–255, and
the hexadecimal range is 0x00–0xFF.
Example:
A:>syscfg -b 1
The state byte has been set to 1.
A:>syscfg -b 2 -x
The state byte has been set to 0x02.
-r
or
--read*
The asterisk
is not part of
the
command
syntax.
NA This option reads the value of state data. When used with
the -x option, the value is reported in hexadecimal format
(0xNN).
Example:
A:>sysfg -r -x
The state byte has been set to 0x02.
A:>syscfg -r
The state byte has been set to 2.
-x
or
--hex
None This option specifies that a value should be in hexadecimal
format.
Example:
A:>sysfg -r -x
The state byte has been set to 0x01.
A:>sysfg -x -b 0x02
The state byte has been set to 0x02.