Owner's Manual

file:///T|/htdocs/SOFTWARE/dtk/3_4/readme/WINDOWS_README.TXT[10/22/2012 4:32:30 PM]
* VLAN objects (cfgNicVLanEnable, cfgNicVLanId, and cfgNicVLanPriority)
displayed using the local RACADM command
"racadm getconfig -g cfgLanNetworking"
or VLAN objects generated in the configuration file using the
local RACADM command
"racadm getconfig -f <file name>" do not contain the leading "#" symbol
which indicates that they are read-only.
Windows PE Installation Issues:
* If virtual flash is enabled and does not contain a valid image
(for example, if the virtual flash contains a corrupt or
random image), you may not be able to install Windows 2000 or
Windows 2003, locally or remotely. To fix this issue, install
a valid image on virtual flash or disable virtual flash if it
will not be used during the installation procedure.
* Running partcfg.bat may fail when virtual media is enabled.
For the hard disk, partcfg.bat uses the driver letter "c:".
When virtual media is enabled, sometimes, the virtual device
gets assigned with the drive letter "c:" And, partcfg.bat
execution fails. To run partcfg.bat successfully, either disable
the virtual media or use the diskpart command to assign a free
driver letter for partcfg.bat.
Windows PE Issues:
* Windows PE 2.0 and 3.0 for 64-bit do not support
racadm.exe for DRAC 4.
* Windows 2008 64-bit cannot be installed using DTK with
Windows PE 3.0. Use Windows PE 2.0 for installing
Windows 2008 64-bit.
* When using the H200 driver provided in Windows PE 3.0 (x64),
the diskpart command does not list the first virtual disk
created. Download the latest driver from the support site
at support.dell.com.
* Windows PE 3.0 does not support PERC 4 controllers.
######################################################################
Information in this document is subject to change without notice.
(C) 2010 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without
the written permission of Dell is strictly forbidden.
Trademarks used in this text: "Dell," "PowerEdge," and
"OpenManage" are trademarks of Dell Inc.; "Microsoft," "Windows," and