Quick Reference Guide

SYSCFG 49
--embscsiraidchb raid, scsi This option sets the second
channel on an embedded RAID
controller to SCSI or RAID. This
option is only valid for supported
systems that support RAID/RAID
and RAID/SCSI settings for
channels A and B. This option can
be replicated.
Example:
A:>syscfg --
embscsiraidchb=raid
embscsiraidchb=raid
All Dell
PowerEdge
systems
--
embsdcardredundancy
mirrormode,
disable
This option sets the redundancy
to mirrormode or enabled.
If sets to mirrormode, read-write
operation happens on both the
secure digital (SD) cards. If one of
the SD cards fails and is replaced,
on booting, the data is copied to
that SD card.
If sets to disable, read-write
operation happens only on SD
card 1.
On modular systems, disable the
vflash key to configure this option.
Example:
A:>syscfg --
embsdcardredundancy=
mirrormode
embsdcardredundancy=
mirrormode
R810, R815,
PER910, and
M910
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration
(continued)
Option Valid
Arguments
Description Applicable
Systems