Quick Reference Guide

Summary of SYSCFG and RAIDCFG Options 271
--lcd2 NA <string> Sets the second line of user-
defined LCD strings.
NOTE: Before setting user
strings for this option, ensure
that --lcd is set to user.
NOTE: If you have a Dell
PowerEdge x 6 xx , x 7 xx , or x 8 xx
system, you need to reboot
your system for the settings to
take effect.
Yes
--logicproc NA enable,
disable
Enables or disables the
logical processor
(Hyperthreading).
Yes
--lpt NA disable, lpt1,
lpt2, lpt3
Disables or sets the parallel
port address.
Yes
--lptmode NA at, ps2 Sets the parallel port mode. Yes
--mem* NA none Reports the size of system
memory.
NOTE: The asterisk is not part
of the command syntax.
Yes
--memintleave NA enable,
disable
Enables or disables the
memory interleave mode.
Yes
--
memoperating
mode
NA optimizer,
mirror,
advancedecc
Selects the memory
operating mode. This feature
is active only if a valid
memory configuration is
detected. This option is
available only on xx1x
systems.
Yes
--memremap NA off, auto Enables or disables memory
remapping.
Yes
Table D-1. SYSCFG Options
(continued)
Options Suboptions Valid
Arguments
Description Replicated