Quick Reference Guide

234 Messages and Codes
RACADM Utility Error Codes and Messages
Table A-7 lists RACADM utility error codes and messages.
48 NO DIAGNOSTIC TASK RUNNING
49 READ ONLY
50 SNARFING IS NOT AVAILABLE
51 TEXT RESOLUTION OF SERVER CHANGED
52 MODULE NOT LOADED
53 IPMI ERROR
54 ERROR IN DIAGNOSTIC FUNCTION
Table A-7. RACADM Error Codes and Messages
Error Code Message
513 An unknown failure occurred.
514 Librac library not initialized.
515 An invalid parameter was passed into
function.
516 Invalid DRSTYPE specified.
517 Librac library already initialized.
518 Invalid transport type specified.
519 Invalid library user.
520 A connection to the RAC controller could
not be established.
521 Failed to perform read operation with RAC
controller.
522 Failed to perform write operation with RAC
controller.
Table A-6. RACADM Firmware Error Codes and Messages (continued)
Error Code Message