Quick Reference Guide

Messages and Codes 215
UPINIT Common Error Codes and Messages
The UPINIT utility checks your commands for correct syntax. When you
enter a command, a message is displayed stating the results of the command.
175 Unspecified error.
176 Getting LCD settings failed.
177 Invalid configuration. Attempting to set cap when
capenable is set to disable.
178 Invalid configuration. Attempting to set cap when
hardware does not support setting.
179 Invalid Configuration Option.
180 Cannot execute command. Parameter is illegal
because command sub-function has been disabled or
is unavailable.
180 Cannot execute command. Parameter is illegal
because command sub-function has been disabled or
is unavailable.
181 Failed to report the removable flash media
redundancy status.
182 Failed to report the Internal SD Module status.
183 Error locating the Virtual Media Key on the
Modular system.
184 Error in setting the redundancy option for the
Internal SD Modules.
185 Error in retrieving the redundancy option for the
Internal SD Modules.
186 Error in setting the redundancy option on Modular
systems for the Internal SD Modules.
Table A-1. SYSCFG Error Codes and Messages
(continued)
Error
Code
Message