Quick Reference Guide

Messages and Codes 211
103 Input file '%s' cannot be read.
104 Invalid argument for option '%s'.
105 Function table lookup error.
106 The machine ID was not found in the file '%s'.
107 The system memory information is not available.
108 Mode can only be used with the --pci option.
109 The device name or index must be present in the
boot order.
110 The output file '%s' could not be opened. Please
make sure the path exists and the media is not
write protected.
111 Could not write to output file, disk may be full.
112 The current password must be supplied with a new
password using --oldsyspwd.
113 The current password must be supplied with a new
password using --oldsetuppwd.
114 The current password can only be supplied when
setting a new password.
115 Actions are not allowed for this filter. Only
alerts are allowed.
116 There was an error getting the option '%s'.
117 The option '%s' is not available or cannot be
configured through software.
118 There was an error setting the option '%s'.
119 The -n (--namefile) option can only be used with -
-pci.
120 The password may only contain alphanumeric
characters.
121 The BIOS passwords have been disabled via jumper.
Table A-1. SYSCFG Error Codes and Messages
(continued)
Error
Code
Message