Quick Reference Guide

RAIDCFG 165
-ctrl -ac=cvd
-c=id -ad=
ch:targ,ch:targ,
...
[or
ch:targ:encl,...]
or
controller
action=
createvdisk
controllerid=
id adisk=
channel:target:
lun,
channel:target:
lun,...
[or
channel:target:
enclosure,...]
-ssz
or
stripesize
<number> Sets the stripe size for the virtual disk.
The stripe size is the amount of array
disk space used on each array disk
included in the stripe. A valid
argument is a number that is less than
the size of the virtual disk. The -ssz
option is optional and can be added to
the command line in any order after
the mandatory option combination.
However, do not specify a unit for
stripe size when creating virtual disks.
The unit is always displayed in KB.
For SCSI controllers, the value of lun
should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in which
case you need to specify values for
channel, target, and enclosure.
Table 4-4. Creating Virtual Disks
(continued)
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameter
Arguments
Description