Owner's Manual

file:///T|/htdocs/SOFTWARE/dtk/3_3/readme/WINDOWS_README.TXT[10/22/2012 4:46:55 PM]
* Windows PE 3.0 does not support PERC 4 controllers.
* If Windows AIK version 1.0 is used to build the DTK image,
the ipconfig command does not return the IP address.
Use Windows AIK version 1.1 to build the DTK image.
######################################################################
Information in this document is subject to change without notice.
(C) 2010 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without
the written permission of Dell is strictly forbidden.
Trademarks used in this text: "Dell," "PowerEdge," and
"OpenManage" are trademarks of Dell Inc.; "Microsoft," "Windows," and
"Windows Server" are either trademarks or registered trademarks
of Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer
to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade
names other than its own.
The sample scripts provided with the Dell OpenManage Deployment
Toolkit are provided "as is." Dell disclaims any and all warranties,
express, implied or statutory, with respect to the sample scripts,
including, but not limited to, the implied warranties of
merchantability, fitness for a particular purpose, title and any
warranty of non-infringement. Use the sample scripts at your own risk.
Dell shall not be liable for any direct or indirect damages incurred
in using the sample scripts. In no event shall Dell or its suppliers
be responsible for any direct or indirect damages whatsoever
(including, without limitation, damages for loss of profits, loss of
use, loss of data, business interruption, or other pecuniary loss, nor
for punitive, incidental, consequential, or special damages of any
kind, under any part of this agreement, even if advised or aware of
the possibility of such damage.
July 2010