Owner's Manual

file:///T|/htdocs/SOFTWARE/dtk/3_3/readme/WINDOWS_README.TXT[10/22/2012 4:46:55 PM]
system or tool.
* Working knowledge of Windows Deployment Services (WDS) or any
other third party deployment system or tool for Windows PE.
* A workstation with the following capabilities:
-- A writable CD/DVD drive and CD/DVD writing software
-- Network access
* A target system with a CD/DVD drive if you are performing a local
deployment or network access if you are performing a network
deployment.
* All Deployment Toolkit utilities, sample scripts, and sample
configuration files.
* All required Windows PE drivers, operating system drivers, and the
Dell utility partition image file.
* A minimum BIOS version is recommended on some of the platforms for
all the DTK options to work correctly. In general, it is good
practice to use the latest ("n") version of BIOS firmware or the
"n-1" version that is available on "support.dell.com."
For more information refer to the OS Support Matrix available
in the support.dell.com.
######################################################################
RELEASE HIGHLIGHTS
######################################################################
Deployment Toolkit version 3.3 has the following new feature:
* Support for Windows PE 3.0 (32-bit and 64-bit)
* Support for the following new BIOS tokens: datareuse,
dcustreamerprefetcher, embsdcardredundancy, qpibandwidthpriority,
and remflashmedia
* Support for assigning and unassigning dedicated hot spares using the
RAIDCFG command
######################################################################
INSTALLATION
######################################################################
For complete installation instructions, see the "Dell OpenManage
Deployment Toolkit User's Guide."
######################################################################
USER NOTES
######################################################################
This section provides information that can help enhance your
experience with the Deployment Toolkit.