User's Manual

Running Deployment Scripts Using DTK and Microsoft Windows PE 81
WINPE3.0_driverinst.bat C:\winpe_30
C:\DELL\x64\DRIVERS
This will pre-install the Dell drivers into winpe.wim .
NOTE: The destination folder C:\winpe_30 is created as part of the process, and
should not already exist. The destination path and the path to Dell drivers should not
contain any white space.
Creating a Bootable CD
Use the following steps to create bootable media:
1
Click Start , navigate to All Programs → Microsoft Windows AIK .
2 Click Windows PE Tools Command Prompt to open a command prompt
window.
3 Move to the C:\program files\Windows AIK\Tools\x32 or C:\program
files\Windows AIK\Tools\amd64
directory based on the system.
4 Run the following command:
oscdimg -n -bc:\winpe_30\etfsboot.com
c:\winpe_30\ISO c:\winpe_30\WinPE3.0.iso
This command creates a CD bootable ISO image called WinPE3.0.iso .
You can use any CD burning software to burn the image onto a CD.
After burning the ISO image, ensure that it boots from the CD drive for all the
supported Dell systems you plan to deploy. After it boots, it is recommended
that you test all the tools and scripts on these systems to ensure that the
integration went well and there are no issues with hardware components not
being recognized.