User's Manual

80 Running Deployment Scripts Using DTK and Microsoft Windows PE

Running the Windows PE 2.0 Image

CD-Based Local Deployment

You are now ready to use your bootable CD to call the deployment

components from the directory structure on the CD:

Boot the target system with the bootable deployment CD.

Execute the master batch file, which calls individual task scripts and

utilities from the CD to complete the deployment process.

Creating and Customizing Images for

Windows PE 3.0

If you are using Windows PE 3.0, download

Windows Automated Installation Kit

(Windows AIK) from the Microsoft website at

www.microsoft.com

. By default,

Windows AIK is copied to the

C:\Program Files\Windows AIK

directory.

Integration of DTK Directory Structure in Windows PE 3.0 Build

DTK provides a script, WINPE3.0_driverinst.bat, to pre-install the Dell

drivers into a base Windows PE 3.0 image (winpe.wim). Use the following

steps to execute this script in 32-bit or 64-bit supported systems:

Open a command prompt on your system and change the directory to the

location of

WINPE3.0_driverinst.bat

Example for 64-bit supported systems:

cd C:\Dell\x64\Drivers\winpe3.x

Example for 32-bit supported systems:

cd C:\Dell\x32\Drivers\winpe3.x

Execute

WINPE3.0_driverinst.bat

with three required arguments:

and

. For example:

WINVPE3.0_driverinst.bat <WIMPATH> <DTKPATH>

is the path to Dell drivers in the extracted DTK.

is the destination path to create the directory structure

for Windows PE 3.0. For example: