User's Manual

Running Deployment Scripts Using DTK and Microsoft Windows PE 79
3 Replace the customized winpe.wim image to the folder
VistaPE_x86\ISO\sources . For example:
Copy c:\vistaPE_x86\winpe.wim
c:\vistaPE_X86\ISO\sources\boot.wim
Creating a Bootable CD
Use the following steps to create bootable media:
1
Click Start , navigate to All Programs → Microsoft Windows AIK .
2 Click Windows PE Tools Command Prompt to open a command prompt
window.
3 Run the following command:
oscdimg -n -bc:\vistaPE_x86\etfsboot.com
c:\vistaPE_x86\ISO c:\vistaPE_x86\WinPE2.0.iso
This command creates a CD bootable ISO image called WinPE2.0.iso .
You can use any CD burning software to burn the image onto a CD.
After burning the ISO image, ensure that it boots from the CD drive for all the
supported Dell systems you plan to deploy. After it boots, you are advised to
test all the tools and scripts on these systems to ensure that the integration
went well and there are no issues with hardware components not being
recognized.