User's Manual

34 Preparing the Directory Structure for Deployment in Microsoft Windows PE
DTK utilities for 32-bit systems are located in the following directories:
• Utilities: Z:\Dell\x32\Toolkit\Tools
•Sample scripts: Z:\Dell\x32\Toolkit\template\scripts
• Sample configuration files: Z:\Dell\x32\Toolkit\template\Configs
DTK utilities for 64-bit systems are located in the following directories:
• Utilities: Z:\Dell\x64\Toolkit\Tools
•Sample scripts: Z:\Dell\x64\Toolkit\template\scripts
• Sample configuration files: Z:\Dell\x32\Toolkit\template\Configs
The directory Z:\Dell\Toolkit\Systems is a placeholder that can be used for
all system information that is captured using sample scripts and tools (for
example, the system specific basic input/output system (BIOS) and
baseboard management controller (BMC) configuration files used by the
DTK utilities for configuring a system).
See "Setting Up a Directory Structure for Deployment" for further discussion
of the deployment directory structure.
DTK Contents
The DTK contains Windows PE-based utilities, sample scripts, sample
configuration files, drivers, and documentation for automating the deployment of
Dell systems. The following sections provide a complete list of the DTK contents
and a short description of each component. For a more complete explanation of
the DTK utilities, see the Command Line Interface Reference Guide. For an
explanation of the sample configuration files and scripts, see "Editing the Sample
Batch Files to Perform a Complete System Deployment in Windows PE."
System Utilities and Supporting Files
Table 3-1 describes the files, located in Toolkit\Tools. These are the core
tools (utilities) that perform pre-operating system configuration and
deployment tasks. See the Command Line Interface Reference Guide for
complete information about the capabilities of each DTK utility.