User's Manual

Known Issues and Frequently Asked Questions 143
Q: What features have changed from the MS-DOS
®
version of RAIDCFG to
the Windows PE and embedded Linux versions?
A: New features for the Windows PE embedded Linux RAIDCFG include:
Support for the following controllers:
• PERC 4/SC, PERC 4/DC, PERC 4/Di, and PERC 4/IM
• PERC 4e/DC, PERC 4e/Di, and PERC 4e/Si
• PERC 5/E Adapter, PERC 5/I Integrated, and PERC 5/i Adapter
• CERC SATA 1.5/6-Channel (CH) or CERC SATA 1.5/2S (These
controllers are supported in Linux only.)
• SAS 5iR Integrated, SAS 5iR Adapter
• SAS 6iR Integrated, SAS 6iR Adapter
• PERC 6/E Adapter, PERC 6/i Integrated, PERC 6/i Adapter
Features that have been removed from the DOS version include:
•The --name and --wait options in the create command
•The
--runlocation and the --scratchlocation options
•The
--getpercentcomplete environment variables
Q: What is the minimum virtual disk size that I can create?
A: For CERC-SATA 1.5/6ch controllers:
• RAID 0: 10MB
• RAID 1: 9MB
• RAID 5: 9MB
For PERC 4 (except PERC 4/IM) controllers:
• RAID 0: 10MB
• RAID 1: 10MB
• RAID 5: 10MB
For PERC 5 controllers:
• RAID 0: 100MB
• RAID 1: 100MB
• RAID 5: 100MB