Quick Reference Guide

48 SYSCFG

--embsataraid off, combined,

ata, raid, qdma

This option configures an

embedded SATA RAID

controller. This option can

be replicated.

off — disables the embedded

SATA RAID controller.

combined — sets the SATA

RAID controller to combined

mode.

ata — sets SATA RAID

controller to ATA mode.

raid — sets SATA RAID

controller to RAID mode.

qdma — sets the SATA RAID

controller to support ATAPI

devices at transfer rates much

higher than PIO. A device driver

must be installed on your system

to use the QDMA mode.

Example:

A:>syscfg --

embsataraid=off

All Dell

PowerEdge

systems

--embscsi1 on, off This option enables or disables

the first embedded SCSI

controller. This option is only

valid for supported systems that

have an embedded

SCSI controller. This option can

be replicated.

Example:

A:>syscfg --embscsi1=on

embscsi1=on

All Dell

PowerEdge

systems

Table 3-2. SYSCFG Options and Arguments for BIOS Configuration

(continued)

Option Valid

Arguments

Description Applicable

Systems