Quick Reference Guide

304 Summary of SYSCFG and RAIDCFG Options
--
tpmactivatio
n
enabled,
disabled,
nochange
Enables or disables the TPM
activation feature.
Yes
--tpmclear NA Clears the contents of the
TPM chip without erasing
the tpmsecurity and
tpmactivation settings.
No
--
undotpmcle
ar
NA Undoes the result of the
tpmclear setting. If you
specify this setting before
specifying the tpmclear
setting, the ‘There is
currently no pending TPM
Clear request’ message is
displayed.
No
--
valsetuppwd
<string> Validates the setup password
for TPM authentication.
If you try to change DTK
settings, you will be
prompted to enter this
password to access the
settings.
No
--
setuppwdove
rride
NA On systems that do not have
a setup password configured,
if you set this option, you
will not be prompted for a
password to access DTK
settings.
No
--turbomode NA enable,
disable
Enables or disables core-
based turbo mode.
Yes
--usb NA on, off,
legacy
Enables or disables the USB
port.
Yes
--usbflash NA auto, fdd,
hdd
Sets the emulation of a USB
flash device to auto, diskette
(fdd), or hard drive (hdd).
Yes
Table D-1. SYSCFG Options
(continued)
Options Suboptions Valid
Arguments
Description Replicated