Quick Reference Guide

Messages and Codes 239
142 Cannot stat /etc/omreg.cfg file. Please ensure
/etc/omreg.cfg file is present and is valid for
your environment. You can copy this file from the
DTK iso.
143 Getting nicselection settings failed.
144 HAPI Driver Load Error.
145 Filter action power reduction is only supported
for the system power warn/fail filters.
146 TPM Clear settings requires setup password.
147 There is currently no TPM Clear request pending.
148 Password is not required for retrieving the ’%s’
options.
149 Setup password is required for setting the ’%s’
options.
150 Invalid Password override.
151 Invalid TPM set option.
152 There was an error setting the TPM option.
153 There is no setup password installed on this
system.
154 The setup password supplied is incorrect. Please
try again.
155 Profile should be custom for setting cpupowermode,
memorypowermode and fanmode.
156 There was an error setting the Power Option.
157 The power cap value entered is out of range.
Please try again.
158 The power cap value entered must be between 0 to
100 if unit is percent.
159 Invalid IPv6 address. The IPv6 address cannot be
link-local or multicast.
Table A-1. SYSCFG Error Codes and Messages
(continued)
Error
Code
Message