Quick Reference Guide

238 Messages and Codes
122 The password length must be between 1 and 32.
123 This password is locked and can only be unlocked
by the admin user.
124 There was an error setting the password.
125 The LCD string length must be between 1 and %s.
126 The LCD string may only contain alphanumeric
characters.
127 There was an error setting the LCD string.
128 The second channel can only be set if the RAID
controller is set to RAID.
129 The set operation '%s' requires sub commands.
130 The service tag for this system is not available.
131 The system ID value is not available.
132 The system information string is not available.
133 A system error has occurred.
134 Usage error.
135 The uuid information is not present on this system
136 Version cannot be accompanied with any other
option.
137 The self-identify blinker timer should be set to
0..255 second(s).
138 Encrypt key is too long.
139 Encrypt key is invalid, accepted characters are 0
to 9 or A to F.
140 Parameter has been temporarily disabled due to a
dependency on other settings.
141 The old password supplied is incorrect. The new
password will not be set. Please try again.
Table A-1. SYSCFG Error Codes and Messages
(continued)
Error
Code
Message