Quick Reference Guide

RACADM 227
Examples
• racadcm racreset soft 1
Start the RAC soft reset sequence in 1 second.
• racadm racreset soft 20
Start the RAC soft reset sequence after 20 seconds.
racresetcfg
Synopsis
racadm racresetcfg
Description
The racresetcfg command removes all database property entries that have
been configured by the user. The database has default properties for all
entries that are used to restore the card back to its original default settings.
After resetting the database properties, the RAC resets automatically.
CAUTION: Before using this command, ensure that you want to restore your
database to its original default state with default user
root and default
password
calvin.
NOTE: After issuing a racresetcfg subcommand, stop and then restart the
following services: Server Agent, Server Agent Event Monitor, and SNMP. See the
Dell OpenManage Server Administrator’s User’s Guide for information on stopping
and restarting the services in your operating system.
Input
None
Output
None
Table 6-22. racresetcfg Subcommand
Command Definition
racadm
racresetcfg
Resets all database configuration parameters to default values;
equivalent to a soft reset.