Quick Reference Guide

RACADM 213
• racadm config -f myrac.cfg
Configures or reconfigures the RAC. The myrac.cfg file may be created
from the command specified in the previous example if the RAC has a
desired configuration to be replicated. The
myrac.cfg file may also be
edited manually as long as the parsing rules are followed.
NOTE: The myrac.cfg file does not contain password information. To include
this information in the file, it must be input manually. If you want to remove
password information from the myrac.cfg file, use the -p option.
• racadm getconfig -h
Displays a list of the available configuration groups on the RAC.
• racadm getconfig -u root
Displays the configuration parameters for the user named root.
fwupdate
NOTE: To use this command, you must have Configure DRAC 4 permission.
Table 6-9 describes the fwupdate subcommand.
Synopsis
racadm fwupdate -u [-w] [-D]
racadm fwupdate -s
racadm fwupdate -g [-u ] [-w][-D] [-a <IP address>]
[-f <path/file>]
racadm fwupdate -c
racadm fwupdate -p -f <update filename> [-u] [-w] [-D]
Table 6-9. fwupdate
Subcommand Definition
fwupdate Updates the firmware on the Dell Remote
Access Controller (DRAC 4).