Quick Reference Guide

106 SYSCFG
--alertpolstatus enable, disable Enables or disables
the alert policy
specified using the
alertpolnum
suboption. This
suboption can be
replicated. This
suboption is
dependent on the
alertpolnum
suboption.
Example (to set the
PEF configuration
parameters):
Example 1 (To
configure the PEF so
that the system is
powered down in
response to a fan
failure event):
A:>syscfg
pefcfgparams
--filter=
fanfail
--filteraction=
powerdown
pefcfgparams
filter=fanfail
filteraction=
powerdown
Table 3-5. BMC and Remote Access Controller Configuration Options
(continued)
Option Suboption Valid
Arguments
Description Applicable
Systems