User's Manual

78 Running Deployment Scripts Using DTK and Microsoft Windows PE

Copy

factory.exe

and

netcfg.exe

from

<cd-drive>:\tools\x86

directory to

the

\WinPE_OPKTools

directory.

Remove the Windows OPK CD or Windows PE CD from the CD drive.

Creating a Standard Windows PE

For building a standard Windows PE with OPK tools, refer to the help files

available on the OPK CD. You can get to the help files after you install OPK

on your development system. Brief instructions are provided here on how to

build a standard Windows PE.

NOTE: You must have read-write permissions on your development system.

You cannot run mkimg.cmd from a read-only device, such as a CD drive.

Create and name a directory on your development system hard drive such

\DellWinPEBuild

. This directory serves as a

<destination_directory>

used with

mkimg.cmd

to create Windows PE.

Insert the 32-bit Windows Server

2003 (with SP1) product CD into the

CD drive.

Open a command prompt and navigate to the

\WinPE_OPKTools

directory you created earlier.

Run the command:

mkimg.cmd

<source_directory>

<DellWinPEBuild> /PNP /WMI.

NOTE: The /PNP option enables support for Plug and Play device drivers;

the

/WMI option enables support for Windows Management Instrumentation.

NOTE: Ensure that you include the /WMI option with mkimg.cmd for the

DTK tools to run properly.