User's Manual

38 Preparing the Directory Structure for Deployment in Microsoft Windows PE
Sample Configuration Files
Table 3-2 describes examples of configuration files used to perform a scripted
deployment. These files are located in Z:\Dell\Toolkit\template\Configs
folder.
NOTE: All configuration files are provided as examples only. These sample
configuration files must be edited before they can be used in any deployment tasks.
Table 3-2. Sample Configuration Files
Toolkit
Components
Purpose Location
RACCFG.INI Sample configuration file
for DRAC 4 remote access
controllers.
Move to the directory
Z:\Dell\Toolkit\Systems\<system>.
RAIDCFG.INI Sample output file to
enable RAID replication.
Move to the directory
Z:\Dell\Toolkit\Systems\<system>.
SYSCFG.INI Sample configuration file
for SYSCFG utility to
configure the BIOS and
BMC settings.
Move to the directory
Z:\Dell\Toolkit\Systems\<system>.
UNATTEND.
TXT
Sample file used in
Windows PE 1.0
environment with
unattended installation of
Microsoft Windows
operating systems. This file
is populated with all the
necessary information for
Dell-supported mass
storage devices.
Move to the directory
Z:\Dell\Toolkit\Systems\<system>
after the UNATTEND.TXT file is
edited.