Quick Reference Guide

SYSCFG 79
--tpmclear NA Clears the contents of the TPM chip
without erasing the tpmsecurity and
tpmactivation settings.
Example:
A:>syscfg tpm --
tpmactivation=enabled --
tpmclear --setuppwdoverride
--
undotpmclear
NA Undoes the result of the tpmclear setting.
If you specify this setting before specifying
the tpmclear setting, the ‘There is
currently no pending TPM Clear
request’ message is displayed.
Example:
A:>syscfg tpm --
tpmactivation=enabled --
undotpmclear --
setuppwdoverride
--valsetuppwd <string> Validates the setup password for TPM
authentication. If you try to change DTK
settings, you will be prompted to enter this
password to access the settings.
Example:
A:>syscfg tpm --
tpmactivation=enabled --
tpmclear --valsetuppwd=
<setup_password>
--
setuppwdover
ride
NA On systems that do not have a setup
password configured, if you set this option,
you will not be prompted for a password to
access DTK settings.
A:>syscfg tpm --
tpmactivation=enabled --
tpmclear --setuppwdoverride
Table 3-3. Suboptions and Arguments for the tpm Option (continued)
Option Suboption Arguments Description