Quick Reference Guide

74 SYSCFG
Example 2:
A:>syscfg --syspwd=
password
--oldsyspwd= password
The password has been
set. Please use a warm
reboot to apply the
password to the system.
NOTE: You cannot disable your
password using DTK. To disable
your password, you must use the
system BIOS.
--sysrev NA This option reports the system
revision. This is a read-only option.
All Dell
PowerEdge
systems
tpm
NOTE: For details about the tpm suboptions and arguments,
see Table 3-3.
Dell PowerEdge
xx0x and later
systems
--turbomode enable, disable This option enables or disables
core-based turbo mode. Turbo
mode is a feature on Intel
processors that allows one
processor core to increase it’s
frequency by one bin whenever the
other core has gone into an idle
state.
Example:
A:>syscfg --turbomode=
enable
--turbomode=enable
Dell PowerEdge
xx1x systems
running on Intel
processors
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid Arguments Description Applicable
Systems