Quick Reference Guide

60 SYSCFG
--noraidprompt* NA This option specifies that the
BIOS must not prompt for
confirmation when changing the
mode of a RAID controller. This
option can only be used with the
--embscsiraid or
--embscsiraidchb options.
Without this option, the user is
prompted during POST to confirm
the change of a RAID controller
from RAID(SCSI) to SCSI(RAID).
This option is not replicated.
CAUTION: When changing a
RAID controller from SCSI to
RAID or from RAID to SCSI,
data is lost on the affected
hard drives. The warning
message for this data is not
displayed if you use the --
noraidprompt option. To
avoid data loss, back up any
information on the hard
drives before changing the
type of controller used with
the drives.
All Dell
PowerEdge
systems
Example:
A:>syscfg --embscsiraid=
raid
--noraidprompt
embscsiraid=raid
NOTE: The asterisk is not part of the
command syntax.
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid Arguments Description Applicable
Systems