Quick Reference Guide

46 SYSCFG
--embsataraid off, combined,
ata, raid, qdma
This option configures an
embedded SATA RAID controller.
This option can be replicated.
off — disables the embedded
SATA RAID controller.
combined — sets the SATA
RAID controller to combined
mode.
ata — sets SATA RAID controller
to ATA mode.
raid — sets SATA RAID
controller to RAID mode.
qdma — sets the SATA RAID
controller to support ATAPI
devices at transfer rates much
higher than PIO. A device driver
must be installed on your system
to use the QDMA mode.
Example:
A:>syscfg --embsataraid=
off
embsataraid=off
All Dell
PowerEdge
systems
--embscsi1 on, off This option enables or disables the
first embedded SCSI controller.
This option is only valid for
supported systems that have an
embedded SCSI controller. This
option can be replicated.
Example:
A:>syscfg --embscsi1=on
embscsi1=on
All Dell
PowerEdge
systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid Arguments Description Applicable
Systems