Quick Reference Guide

290 Summary of SYSCFG and RAIDCFG Options
--cstates NA enable,
disable
Enables or disables the
power c states of the
processor.
Available only on xx1x
systems.
Yes
--dbpm NA enable,
disable
Enables or disables demand-
based power management.
Yes
--devseq NA numerical
list,
separated by
commas
or
list of device
names,
separated by
commas
Sets the boot order for hard
drives.
NOTE: This option appears
only if your system is
configured with two or more
bootable storage controllers.
If your system is not
configured with bootable
storage controllers and this
option is included in the
configuration file, the utility
generates a usage error.
Yes (for
systems
that
support a
list of
device
names
only)
--
embhypervisor
NA enable,
disable
Enables or disables the
embedded hypervisor port.
Yes
--embideraid NA on, off Enables or disables the
embedded IDE RAID
controller.
Yes
--embnic1 NA on, off,
onnopxe,
onwithiscsi
Enables or disables the first
embedded network interface
controller (NIC).
Yes
--embnic2 NA on, off,
onnopxe,
onwithiscsi
Enables or disables the
second embedded NIC.
Yes
--embnic3 NA on, off,
onnopxe,
onwithiscsi
Enables or disables the third
embedded NIC.
Yes
Table D-1. SYSCFG Options (continued)
Options Suboptions Valid
Arguments
Description Replicated