Quick Reference Guide

SYSCFG 29
--assignintr standard,
distributed
This option controls the interrupt
assignment of PCI devices in the
system. This option is set to
standard by default, causing
standard interrupt routing that
uses interrupt A, B, C, and D for all
PCIe devices. When set to
distributed, the interrupt routing
is swizzled at the MCH root ports
to minimize sharing of interrupts
across all PCIe (and PCI-X in the
Programmable Interrupt
Controller (PIC) mode) devices.
Example:
A:>syscfg --assignintr=
standard
assignintr=standard
All Dell
PowerEdge
systems
--bezelir enable, disable This option enables or disables the
ESM to monitor and log front
bezel intrusion conditions.
Example:
A:>syscfg --bezelir=
enable
bezelir=enable
All Dell
PowerEdge
systems
--bootmode uefi, bios This option enables booting to
Unified Extensible Firmware
Interface (UEFI) -capable
operating systems or ensures
compatibility with operating
systems that do not support UEFI.
Example:
A:>syscfg --bootmode=
uefi
bootmode=uefi
Dell PowerEdge
xx1x systems
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid Arguments Description Applicable
Systems