Quick Reference Guide

234 Messages and Codes
83 The dependent option '%s' required for this
subcommand is missing in the command line.
84 Duplicate sub command '%s' has been entered.
85 The script file does contain not a valid DTK
environment script signature.
86 The format of the environment variable is
incorrect.
87 The --envar option can only be used for a single
option.
88 The --envar option can only be used for report
operations.
89 The individual sub commands should be specified
for the -s option.
90 Getting external serial connector settings failed.
91 Setting external serial connector settings failed.
92 There was an error opening the file.
93 File does not have write permission.
94 The file contains invalid options.
95 The replication information does not match for
this system.
96 There can only be one section in the input file.
97 Bad ini file, the section cannot be found.
98 The format of the bios image file is incorrect.
99 Report operations and set operations must be
separate.
100 Help is not available for the option.
101 The -x (--hex) option can only be used with -b or
-r.
102 Input file '%s' not found.
Table A-1. SYSCFG Error Codes and Messages (continued)
Error
Code
Message