Quick Reference Guide

210 RACADM
Output
This subcommand generates error output upon encountering either of the
following:
• Invalid syntax, group name, object name, index, or other invalid database
members
• RACADM utility transport failures
If errors are not encountered, this subcommand displays the contents of the
specified configuration.
Examples
• racadm getconfig -g cfgLanNetworking
Displays all of the configuration parameters (objects) that are contained in
the group
cfgLanNetworking .
• racadm config -g cfgLanNetworking -o
cfgNicIpAddress 10.35.10.100
Sets the cfgNicIpAddress configuration parameter (object) to the value
10.35.10.110. This IP address object is contained in the group
cfgLanNetworking .
• racadm getconfig -f myrac.cfg
Reads all of the configuration objects, from all of the RAC group
configuration parameters and place them in a file called
myrac.cfg .
-i The -i <index>, or index option, is valid only for indexed groups and can
be used to specify a unique group. The <index> is a decimal integer from 1
through 16. If -i <index> is not specified, a value of 1 is assumed for
groups, which are tables that have multiple entries. The index is specified
by the index value, not a “named” value.
-u The -u <username>, or user name option, can be used to display the
configuration for the specified user. The <username> option is the log in
user name for the user.
Table 6-8. getconfig Subcommand Options (continued)
Option Description