User's Manual

Preparing the Directory Structure for Deployment in Embedded Linux 93
Boot the CD onto a target system. Figure 7-2 shows the directory structure on
the target system.
prereqcheck Contains files that are used by
srvadmin-openipmi.sh to run
preliminary requisite checks.
/mnt/cdrom/tools/
openipmi/
supportscripts
sa.1 Contains the Linux kernel images /mnt/cdrom/isolinux
sa.2 Initial RAM disk containing the
embedded Linux component and
the DTK tools
/mnt/cdrom/isolinux
Source RPMS
(SRPMs)
Contains open source components
used in the Dell-provided
embedded Linux
/mnt/cdrom/srpms
srvadmin-
hapi.<version
number>.i386.rpm
Contains a set of drivers and
libraries used by the DTK tools to
interact with the hardware. Used to
build your custom ISO.
/mnt/cdrom/tools
srvadmin-omilcore-
hapi.<version
number>.i386.rpm
Contains a set of drivers and
libraries used by the DTK tools to
interact with the hardware. Used to
build your custom ISO.
/mnt/cdrom/tools
srvadmin-
openipmi.sh
Checks if the OpenIPMI driver
needs to be installed or upgraded,
and if required, attempts to do so.
Also displays status information and
information about any action it
attempts.
/mnt/cdrom/tools/
openipmi/supportscripts
start-stage3.sh The startup script used by the
toolkit ISO image to boot.
/mnt/cdrom/tools
start-hapi.sh The startup script to load and
configure the HAPI drivers.
/mnt/cdrom/tools
start-raid.sh Contains the basic setup for raidcfg
to work.
/mnt/cdrom/tools
Table 7-1. Mounted CD Contents (continued)
Contents Details Location