User's Manual

114 Preparing the Script Files for Deployment Using Embedded Linux
The majority of the editing required for the DTK sample scripts involves the
following script. As a result, the majority of the scripting discussion focuses on:
tkenvset.sh
Other task scripts might require edits in certain situations. These optional
edits are discussed in "Editing DTK Task Scripts."
tkenvset.sh
The tkenvset.sh script sets the paths for the DTK utilities and scripts and sets
the variables for the systems to be deployed and configured. These variables
and paths must be specified before any of the scripts can be used.
• sysrep.sh — Used
by
dtkrunall.sh to
apply the BIOS
and BMC settings
saved in a file to
the current
system.
•
raidrep.sh — Used
by
dtkrunall.sh to
apply the RAID
settings saved in a
file to the current
system.
•
sysdrmk — Used
by
upinit.sh to
patch the boot
sector.
•unzip — Used
by
upinit.sh to
populate the
Dell utility
partition.
•
mke2fs — Used
to make a
ext2
file system.
•
upimg.bin —
Contains the
zipped contents
of the Dell
utility partition.
Table 8-1. Scripts For Deployment (continued)
Capture Scripts Replication Scripts Deployment Scripts Others